Industrial CF

Compact Flash cards for the industry from ATP Electronics

  • SLC, pSLC, MLC NAND Flash
  • Long-term availability, fixed Bill of Material (BOM)
  • S.M.A.R.T Life Monitoring for checking the remaining service life
  • PowerProtector - Integrated hardware-based data protection technology during power outages
  • Advanced Wear Leveling
  • Bad Block Management
  • Read Disturb Protector - AutoRefresh to ensure data integrity while reading
  • RoHS conform, CE/FCC certification
  • Description

    Using high-quality NAND flash devices and advanced wear leveling technology, ATP's Industrial Grade Compact Flash cards have an extremely long lifetime. In addition, the implemented AutoRefresh technology monitors the bit error rate during each write to better ensure data integrity.

    The Compact Flash cards are available in 512MB, 1GB, 2GB, 4GB, 8GB, 16GB and 32GB (SLC), 4GB, 8GB and 16GB (pSLC) and in 8GB, 16GB, 32GB (MLC).

    S.M.A.R.T Life Monitor

    The ATP S.M.A.R.T Life Monitor (Self-Monitoring, Analysis and Reporting Technology) is a tool which makes it possible to see the actual state of the Compact Flash. So it shows you for example the remaining write-/delete- cycles or indicate the Raw Read Error Rate and supervises the wear. This information helps to estimate the probability of a disc drive fall out and if necessary save the data in time and replace the Compact Flash.

    PowerProtector

    The PowerProtector prevents you from any data-loss or writing-mistakes who could appear during a power failure. This standalone solution holds enough power to compensate any voltage variations, makes it independent from Controller and Firmware, and is also insensitive to temperature fluctuations.

    Advanced Wear Leveling

    This function aims at extending memory cards life expectancy. ATP Advanced Wear Leveling treats and manages all NAND Flash components in ONE drive as one unified memory management unit. Endurance is further improved when the total density increases (more spare space for spare blocks). Advanced Wear Leveling maps host device's logical addresses into NAND Flash physical addresses equally and randomly.

    NAND Flash: SLC vs. MLC

    SLC (Single Level Cell) and MLC (Multi Level Cell) are both NAND-based memory technologies. They refer to the structure of Flash memory cells and how many bits each cell can store. SLC NAND stores one bit per cell while MLC NAND stores two bits per cell. The SLC NAND Flash is therefore more reliable: higher durability (number of read and write cycles), faster, power saving.

    MLC (Multi Level Cell) NAND Flash has a lower manufacturing cost versus SLC NAND. It stores more than 1 bit in one cell, which makes it very attractive (higher density for less money). Its durability and reliability are not as high as for SLC. MLC-based products are recommended for price-sensitive industrial projects.

  • Technical data

    NAND Flash SLC pSLC MLC
    Capacity 512MB - 32GB 4GB - 16GB 8GB - 32GB
    Sequential reading 61MB/s 110 MB/s 108 MB/s
    Sequential Write 55MB/s 80 MB/s 46MB/s
    Operating temperature -40°C +85°C 0°C +70°C 0°C +70°C
    TBW (Max.) 1 280TB 128TB 38TB
    MTBF @ 25°C (Max.) 5,000,000 hrs 2,000,000 hrs 2,000,000 hrs
    Number of slots (Min.) 10,000 10,000 10,000
    Dimensions (mm) 36.4 x 42.8 x 3.3 36.4 x 42.8 x 3.3 36.4 x 42.8 x 3.3
  • Product number

    CF Card SLC i-Temp -40°C +85°C

    Product number Capacity Description
    -- 128MB CF card SLC i-Temp -40°C +85°C
    -- 256MB CF card SLC i-Temp -40°C +85°C
    AF512CFI-TADXP 512MB CF card SLC i-Temp -40°C +85°C
    AF1GCFI-TADXP 1GB CF card SLC i-Temp -40°C +85°C
    AF2GCFI-TADXP 2GB CF card SLC i-Temp -40°C +85°C
    AF4GCFI-TACXP 4GB CF card SLC i-Temp -40°C +85°C
    AF8GCFI-TACXP 8GB CF card SLC i-Temp -40°C +85°C
    AF16GCFI-TACXP 16GB CF card SLC i-Temp -40°C +85°C
    AF32GCFI-TABXP 32GB CF card SLC i-Temp -40°C +85°C

    CF Card pSLC c-Temp 0°C +70°C

    Product number Capacity Description
    AF4GCFA-TABXX 4GB CF card pSLC c-Temp 0°C +70°C
    AF8GCFA-TABXX 8GB CF card pSLC c-Temp 0°C +70°C
    AF16GCFA-TABXX 16GB CF card pSLC c-Temp 0°C +70°C

    CF MLC c-Temp 0°C +70°C

    Product number Capacity Description
    AF8GCFP3-TABXX 8GB CF card MLC c-Temp 0°C +70°C
    AF16GCFP7-TABXX 16GB CF card MLC c-Temp 0°C +70°C
    AF32GCFP7-TABXP 32GB CF card MLC c-Temp 0°C +70°C
  • Old reference

    CF Card SLC i-Temp -40°C +85°C

    EOL reference Capacity Description New reference
    AF128CFI-6ABXX 128MB CF card SLC --
    AF256CFI-6AAXX 256MB CF card SLC --
    AF512CFI-7ABXX, AF512CFI-6AAXX 512MB CF card SLC AF512CFI-TADXP
    AF1GCFI-7ABXX, AF1GCFI-6AAXX, AF1GCFI-7ACXP 1GB CF card SLC AF1GCFI-TADXP
    AF2GCFI-7ABXX, AF2CFI-6AAXX, AF2GCFI-7ACXP 2GB CF card SLC AF2GCFI-TADXP
    AF4GCFI-7ABXX, AF4CFI-6AAXX, AF4GCFI-7ACXP 4GB CF card SLC AF4GCFI-TACXP
    AF8GCFI-6AAXX, AF8GCFI-7ABXP 8GB CF card SLC AF8GCFI-TACXP
    AF16GCFI-6AAXX, AF16GCFI-7ABXP 16GB CF card SLC AF16GCFI-TACXP
    AF32GCFI-7AAXP 32GB CF card SLC AF32GCFI-TABXP
  • Request for proposal

    global_kontakt

    My request
    My contact details
  • System-D GmbH

    Reginbaldstr. 9
    81247 Munich

    Tel: +49 (0)89 / 215 481-56
    service(at)system-d.de

    +49 (0)89 / 215 481-56